Ir a la versión más ligera, para móviles

Europeos.es : Inicio > Trabajo en Dinamarca > Profesores de universidades y de la enseñanza superior > Phd Scholarship In Fabrication And Characterization Of Quantum Light Sources

en Español in English auf Deutsch en Français ...

Trabajar de Profesores de universidades y de la enseñanza superior en Dinamarca

Phd Scholarship In Fabrication And Characterization Of Quantum Light Sources

Clasificación del trabajo: Profesionales científicos e intelectuales : Profesionales de la enseñanza : Profesores de universidades y de la enseñanza superior : Profesores de universidades y de la enseñanza superior.

Arbejde, der forudsætter viden på højeste niveau inden for pågældende område : Undervisning og pædagogisk arbejde : Undervisning og forskning ved universiteter og højere læreranstalter : Undervisning og forskning på universiteter og højere læreranstalter

Descripción de la oferta de trabajo:

The Quantum and Laser Photonics Group at DTU Fotonik, Department of Photonics Engineering at the Technical University of Denmark, is seeking a candidate for a PhD position. The PhD student will work in the field of microfabrication and quantum optical characterization of sources of single indistinguishable photons based on semiconductor quantum dots. The position is offered with support from the European Research Council.

Solid-state sources of single photons are expected to play an important role in various quantum information applications, such as secure communications, quantum computation and metrology. These applications require deterministic on-demand emission as well as high efficiency, purity and indistinguishability of the emitted photons. A promising platform for a deterministic single-photon source (SPS) is based on the semiconductor quantum dot (QD) in a solid-state environment. Until now the activities at DTU Fotonik have been limited to theory and modelling of SPSs, but with this opening we are launching also an experimental activity in this field.

Responsibilities and tasks

You will participate in a project team with several Postdocs and PhD students, which will design and fabricate quantum-dot-based SPSs meeting all the requirements of the quantum information applications. The focus of this PhD project is the experimental activity including the microfabrication and the optical characterization of the devices.

We will grow wafers with cavities with Stranski-Krastanov randomly distributed semiconductor InAs QDs surrounded by distributed Bragg reflectors in collaboration with the University of Würzburg. We will subsequently identify the randomly positioned QDs using an optical imaging technique, and we will etch pillar structures around the QDs. The lithography will be done using a combination of UV and e-beam lithography, and the etching will be performed using reactive ion etching, and possibly also wet chemical etching. The structures will be electrically contacted in order to use the Stark effect for stabilization of the local charge environment. For the optical characterization, the devices will be characterized placed in a cryostat and the QDs will be excited using resonant or quasi-resonant optical excitation. We will then characterize the single-photon emission in terms of purity, indistinguishability and efficiency. The experimental activity will take place in a close feedback loop with the theoretical activity to take into account the experimental results in subsequent design iterations, and the entire project team will discuss promising opportunities for next-generation SPS designs.

The candidate is thus expected to

  • Perform spectroscopy and optical imaging of QDs.
  • Perform UV and e-beam lithography.
  • Perform reactive ion etching and wet chemical etching.
  • Perform metal deposition.
  • Implement a setup for optical device characterization.
  • Characterize the devices in terms of efficiency, purity (Hanbury Brown-Twiss) and indistinguishability (Hong-Ou-Mandel).
  • Supervise project students.
  • Contribute to the development of new SPS designs.

Qualifications

Candidates should have a two-year master's degree (120 ECTS points) or a similar degree with an academic level equivalent to a two-year master's degree. Additionally, the candidate must have passed an introductory course on quantum mechanics. The candidate must describe his/her previous experience with quantum mechanics in the cover letter (see below).

Approval and Enrolment

The scholarship for the PhD degree is subject to academic approval, and the candidate will be enrolled in one of the general degree programmes at DTU. For information about our enrolment requirements and the general planning of the PhD study programme, please see the DTU PhD Guide. http://www.dtu.dk/english/Education/PhD/Rules/PhDguide

Assessment

The assessment of the applicants will be made by Assoc. Prof. Niels Gregersen, Assist Prof. Luca Vannucci and Prof. Kresten Yvind.

We offer

DTU is a leading technical university globally recognized for the excellence of its research, education, innovation and scientific advice. We offer a rewarding and challenging job in an international environment. We strive for academic excellence in an environment characterized by collegial respect and academic freedom tempered by responsibility.

Salary and appointment terms

The appointment will be based on the collective agreement with the Danish Confederation of Professional Associations. The allowance will be agreed upon with the relevant union. The period of employment is 3 years.

You can read more about career paths at DTU here. http://www.dtu.dk/english/about/job-and-career/working-at-dtu/career-paths

Further information

Further information may be obtained from Assoc. Prof. Niels Gregersen, ngrefotonik.dtu.dk, tel.: +45 45253789. (Applications submitted by email will not be considered, instead you should use the on-line portal described below.).

You can read more about DTU Fotonik at www.fotonik.dtu.dk. http://www.fotonik.dtu.dk

Application

Please submit your online application no later than 24 November 2020 (local time). Applications must be submitted as one PDF file containing all materials to be given consideration. To apply, please open the link "Apply online", fill out the online application form, and attach all your materials in English in one PDF file. The file must include:

  • A letter motivating the application (cover letter)
  • Curriculum vitae
  • Grade transcripts and BSc/MSc diploma
  • Excel sheet with translation of grades to the Danish grading system (see guidelines and Excel spreadsheet here) http://www.dtu.dk/english/Education/phd/Applicant/Pre_acceptance-1-
  • Name and email address of at least one reference, e.g. your MSc project supervisor.

Candidates may apply prior to ob­tai­ning their master's degree but cannot begin before having received it.

Applications and enclosures received after the deadline will not be considered.

All interested candidates irrespective of age, gender, race, disability, religion or ethnic background are encouraged to apply.

DTU Fotonik has 220 employees with competences in optics. In a typical year, DTU Fotonik educates 55 PhD students from more than 25 countries and our student numbers are constantly growing. As one of Europe's largest public photonics research departments, DTU Fotonik covers a multitude of optical disciplines ranging from fundamental light-matter interaction and optical telecommunications to applied research and innovation. Our research topics include optical sensors, lasers, LEDs, photovoltaics, ultra-high speed optical transmission systems, bio-photonics, nano-optics and quantum photonics.

Technology for people

DTU develops technology for people. With our international elite research and study programmes, we are helping to create a better world and to solve the global challenges formulated in the UN's 17 Sustainable Development Goals. Hans Christian Ørsted founded DTU in 1829 with a clear vision to develop and create value using science and engineering to benefit society. That vision lives on today. DTU has 12,000 students and 6,000 employees. We work in an international atmosphere and have an inclusive, evolving, and informal working environment. Our main campus is in Kgs. Lyngby north of Copenhagen and we have campuses in Roskilde and Ballerup and in Sisimiut in Greenland.

País del trabajo: Dinamarca.

Número de puestos: 1.

Empleador: Danmarks Tekniske Universitet.

Instrucciones para solicitar:

Please apply using one of the specified channels

Forma de contacto:

  • Ciudad: Kongens Lyngby; Código postal: 2800; Calle: Anker Engelunds Vej, Número: 101
  • Sitio web: https://www.dtu.dk/om-dtu/job-og-karriere/ledige-stillinger/job?id=4ad9cc48-3c1f-46fa-b3da-a8158c8067d7

Identificador de la vacante:5228276.

Ver las 467 ofertas de trabajo de Profesionales científicos e intelectuales : Profesionales de la enseñanza : Profesores de universidades y de la enseñanza superior : Profesores de universidades y de la enseñanza superior ofertadas.

Ofertas de trabajo similares: