Ir a la versión más ligera, para móviles
en Español in English auf Deutsch en Français ...

Oferta de trabajo de Ingenieros mecánicos en Genève (Suiza)

Design And Method Engineer #12803#



Clasificación del trabajo: Profesionales científicos e intelectuales : Profesionales de las ciencias y de la ingeniería : Ingenieros (excluyendo electrotecnólogos) : Ingenieros mecánicos.
Akademische Berufe : Naturwissenschaftler, Mathematiker und Ingenieure : Ingenieurwissenschaftler (ohne Elektrotechnik, Elektronik und Telekommunikation) : Maschinenbauingenieure.

Descripción de la oferta de trabajo:
Introduction Design Engineer in the Engineering Department, Mechanical Engineering Design Office. You will join: The Engineering Department that provides engineering competences, infrastructure systems, and technical coordination for the world's largest particle accelerator complex and its experimental facilities. The Group that provides specific engineering solutions for CERN, combining mechanical design, production facilities, and material sciences support. The Design Office in charge of mechanical design activities required for CERN projects. The Design Office main activities are: The study and development of new products based on structural, thermal, fluid-dynamic, shock and vibration analyses. Analytical computations in compliance with relevant standards and code specifications. Detailed design (3D and 2D) and drafting. These activities are carried out relying on a large range of CAD and CAE tools, mainly Dassault Systèmes CATIA v5, SmarTeam, Ansys Multiphysics, and Workbench. Functions As a Design & Method Engineer, you will follow the design and construction of equipment for accelerators and detectors. Upgrading existing equipment will be one of your tasks as well as developing new devices for future machines. Cryogenic applications, magnets, superconductivity, radio frequency, safety, reliability, ultra-high vacuum technology are just a few of the key words related to this position. This will involve: Engineering and hands-on design of components and systems from the conceptual design to detailed specification and manufacturing drawings using CAD tools. During the first years of your contract, you will spend the main part of your working time to fulfil this task. After the initial design period, you will become the reference engineer of the Design Office for what concerns management of the drawing methods, the CAD data life cycle, the CAD data quality and the traceability procedures. You will analyse the working methodologies of the Design Office, define improvements following existing industrial standards and implement the modifications. You will be as well involved in technical projects, specifically: Write technical specifications, perform market surveys and price enquiries to find appropriate suppliers. Follow-up the production in CERN workshops and in industry. Supervise technical staff, students and/or fellows when necessary. Qualification required Master's degree or PhD or equivalent relevant experience in the field of mechanical engineering or a related field. Experience and competencies The experience required for this post is: Extensive experience as a Mechanical Engineer in a design office in industry or research centres, preferably in a large spectrum of technical activities. Follow-up of projects from the design to the construction and commissioning phases. Demonstrated experience in the development of fit for purpose design solutions, with the ability to analyse and solve typical mechanical engineering problems using a sound knowledge of strength of materials, heat transfer and materials selection principles. Proven hands-on experience in working with 3D parametric computer-aided design tools, preferably with CATIA software. Personal expertise in drafting and controlling 2D technical drawings in compliance with relevant standards for dimensioning and tolerancing, in particular ISO Geometrical Product Specifications (GPS). Demonstrated experience in the implementation and use of CAD/PDM life cycle, traceability and quality procedures. Experience in providing technical leadership, to coach and motivate a team of designers and drafts men would be an asset. The technical competencies required for this post are: 3D & 2D technical drawing: knowledge of CAD/PLM tools. Design of mechanical systems. Product lifecycle management. Mechanical analysis & modelling. Precision assembly and construction. The behavioural competencies required for this post are: Achieving results: delivering high quality

Servicio de empleo de origen: SECO, Servicios Públicos de Empleo, Suiza.

País del trabajo: Suiza.

Región: Genève.

Ver 52 ofertas de trabajo en "Genève" (Suiza).

Fecha de inicio: 30/11/2017.

Nº de vacantes: 1.

Experiencia: Más de 5 años.

Nivel educativo requerido: Sin especificar.

Lenguas exigidas: inglés: (notable) .

Carnet de conducir: No.

Salario: 8513.0 CHF mínimo y 12156.0 CHF máximo (Bruto Mensualmente).

Tipo de contrato: Jornada completa.

Duración del contrato: Determinado.

Cómo solicitar: Otros (véase la descripción).

Cómo solicitar el puesto:

Empresa: CERN Organisation Européenne pour la Recherche Nucléaire.

Dirección: CERN Organisation Européenne pour la Recherche Nucléaire Route de Meyrin 385 1217 Meyrin.





Ver las 396 ofertas de trabajo de Profesionales científicos e intelectuales : Profesionales de las ciencias y de la ingeniería : Ingenieros (excluyendo electrotecnólogos) : Ingenieros mecánicos ofertadas.

Ofertas de trabajo similares:

Entwicklungsingenieur Mechanische Konstruktion. Suiza, 17 Oct. 2017.

Design and Method Engineer #12803#. Suiza, 17 Oct. 2017.

Entwicklungsingenieur/in Mechatronik/Maschinenbau. Suiza, 10 Oct. 2017.

Technische/r Projektleiter/in ID-2107 Arbeitsort: Langenthal. Suiza, 06 Oct. 2017.

Regional Sales Engineer. Suiza, 29 Sep. 2017.

Projektingenieur Sondermaschinenbau Arbeitsort: Kreuzlingen. Suiza, 22 Sep. 2017.

Konstrukteur/Projektleiter mit Sprizguss-Erfahrung ID-881 Arbeitsort: Uster. Suiza, 20 Sep. 2017.

Maschinenbauingenieur. Suiza, 06 Sep. 2017.